连续弯箱梁自行车桥地震响应分析          下载免费PDF全文

施有志  林四新  阮建凑  林树枝 《地震工程学报》2020,42(5):1208-1216

为研究厦门市弯箱梁自行车桥的地震响应规律，采用SAP2000有限元软件建立自行车高架桥三维壳体模型，在考虑多遇地震和罕遇地震水准作用及不同加载方向的基础上，分别采用反应谱分析法和时程分析法进行该桥的动力响应分析。结果表明：自行车桥z方向位移分量最大，且z方向分量极值均发生在曲线分叉段；相对剪力而言，桥墩竖向支反力相对较小；E1和E2地震水准响应情况随时间的变化趋势基本一致，桥梁结构未进入塑形状态，抗震性能良好，安全性指标较高；反应谱法计算得到的响应包络值相对3条不同的地震时程结果的峰值大，在实际桥梁抗震分析过程中需要综合考虑两者的分析结果。文章研究结果对今后自行车桥设计和抗震性能分析具有指导意义，并可为研究者对该类桥的进一步研究提供借鉴。  相似文献   

多层砂土地基扩底桩单桩抗压模型试验及颗粒流模拟研究     

李飞  杨俊杰  宋琦  孙涛 《中国海洋大学学报(自然科学版)》2020,(2):116-125

利用室内半模试验和颗粒流数值模拟,揭示多层砂土地基扩底桩单桩抗压承载特性及变形特征。结果表明,通过对比分析极限承载力与H_h/D(持力层厚度与扩大头直径之比)的关系可以看出,单桩的抗压极限承载力随H_h/D逐渐增加,当H_h/D超过2.0时,极限承载力基本不再增加,此时的单桩抗压极限承载力稳定在300.01~303.25 N,是H_h/D=0.5时极限承载力(183.83 N)的1.65倍。扩大头下部土体发生局部压缩-剪切破坏,破坏面从扩大头底面边缘向斜下方扩展,在水平方向影响范围达到最大后逐渐向桩内侧收缩;荷载作用越大,地基破坏区域越大,相应的极限抗压承载力也越大;持力层厚度增加,扩大头分担的荷载比例增大,分担的荷载达到稳定需要的桩顶位移也越大,H_h=0.5 D试验扩大头分担的荷载比例稳定时为60%,对应的桩顶位移约为29 mm;桩顶位移达到33 mm后,H_h=1.0~3.0 D试验稳定在63%~65%之间;通过细观颗粒流理论对砂土移动特性的研究发现,持力层厚度从0.5 D增大至2.0 D,破坏面的起始扩展角度从31°增大至42°。数值模拟研究结果与模型试验数据吻合效果良好,证明该方法分析多层砂土地基扩底桩单桩抗压荷载传递机理是可行的。  相似文献   

河北滦县－滦南县段滦河冲积平原水文地质特征分析     

杨庆洪  左文喆  祝彬 《地质与资源》2020,29(4):374

滦县－滦南县段滦河冲积平原铁矿群司家营铁矿区、马城铁矿区、坎上铁矿区、常裕铁矿、高官营铁矿总储量达几十亿吨，均覆盖有巨厚的第四系含水体，水文地质条件复杂，一直未能开采，成为“大水呆滞金属矿”，被视为开发过程中可能对区域水文地质环境造成较大影响的大水矿区，列为限制开采区，至本世纪初才相继解限投产.通过对司家营铁矿北区、司家营铁矿南区、马城铁矿区、坎上铁矿区、常裕铁矿、高官营铁矿等6处矿山的水文地质条件的分析，论述了滦县－滦南县段滦河冲积平原的水文地质特征.  相似文献   

福建浦城县耕地土壤元素地球化学评价     

马骁  陈智贤  林联桂  王彪  敦妍冉 《中国地质调查》2020,7(2):89-94

福建省浦城县是水稻和薏米的重要产区,土壤环境质量和有益营养元素的含量直接影响农作物的产量和品质。基于福建省浦城县1: 5万比例尺土壤地球化学调查成果,依据相关标准和规范对研究区土壤植物生长必需营养元素、重金属环境质量和植物生长有益元素Se进行了评价,为研究区优质土地开发、特色农产品种植、高标准农田建设等提供了科学依据。评价结果表明: 植物生长必需大量元素有机质、N及碱解氮总体处于丰富—适中状态,P总体处于适中—缺乏状态,速效磷处于缺乏—很缺乏状态,K及速效钾含量丰富; 植物生长必需中量元素S的分布情况主要以丰富—适中为主; 植物生长必需微量元素Fe、B、Mn处于很缺乏状态,Mo的分布主要以很丰富—丰富为主,Zn和Cl的分布主要以很丰富—丰富为主; 植物生长有益元素Se总体处于适量状态,富硒土壤面积为6.41 km²。整体而言,浦城县土壤重金属元素达到了一等土壤环境质量标准,具备发展绿色农产品的土壤环境生态条件。  相似文献   

Gravity and magnetic field characteristics and regional ore prospecting of the Yili ancient continent,West Tianshan,Xinjiang Uygur Autonomous Region,China     

《China Geology》2020,3(1):104-112

Gold, iron, copper, lead-zinc and other mineral exploration in West Tianshan, Xinjiang Uygur Autonomous Region, has made remarkable progress in recent years. However, due to the dispute on the tectonic division of West Tianshan, the ore-controlling factors and the regional metallogenic laws are controversial. The authors analyze regional gravity data and notice that the high-value region corresponds to the Yili ancient continent, thus the southeastern boundary of the Yili ancient continent is delineated. Comparative analysis of gravity, aeromagnetic and geologic data reveals that the Tulasu basin, where some medium to large epithermal gold deposits locate, lies above the Yili ancient continent; the Yili Carboniferous-Permian rift extends in E-W direction, numbers of copper deposits have been found in the mid-west section of the rift which lies above the Yili ancient continent, whereas few copper deposits have been discovered in the east section which is outside the Yili ancient continent. Accordingly, the Yili ancient continent may he rich in gold, copper and other metal elements; the metal-bearing hydrothermal solution moves up with the activity of magmatism, and deposits in the favorable places (the Tulasu basin and the Yili Carboniferous-Permian rift), forming numerous small and medium gold, copper deposits, as well as some large and super-large gold deposits. Therefore, the tectonic-magmatic hydrothermal zone above the Yili ancient continent should be the prospective area for epithermal gold and copper polymetallic deposits.  相似文献   

华北克拉通南缘石炭系本溪组铁-铝黏土矿物质来源: 以河南三门峡大安铝黏土矿床为例^*          下载免费PDF全文

刘学飞  王庆飞  马遥  李中明  赵利华  周智慧  刘百顺  马欣莉 《古地理学报》2020,22(5):965-976

华北克拉通在中奥陶世至晚石炭世期间一直出露地表,经历了长期的风化作用,形成大规模的铁-铝黏土矿,其成矿物源一直是研究的热点,尤其是本溪组底部铁矿和铁质黏土矿与上部铝黏土矿是否为同一来源尚未查清。本研究选取克拉通南缘大安铝黏土矿床作为研究对象,展开微区矿物及元素地球化学组成分析,进一步探讨铁-铝黏土矿物质来源。大安矿床内含矿岩系自下而上包括铁质黏土岩、铝土矿、铝质黏土矿;局部喀斯特高地缺失铝土矿,铝质黏土矿直接覆盖于铁质黏土岩之上。铁质黏土岩在洼地以菱铁矿、黄铁矿和伊利石为主,在隆起区以赤铁矿、伊利石和高岭石为主。铝土矿以硬水铝石、伊利石和锐钛矿为主;铝质黏土矿主要矿物为伊利石。矿物微区分析在黏土矿底部发现大量的碳化硅和少量自然硅、硅铁矿、铬铁矿;区域对比揭示北秦岭造山带内商丹缝合带和二郎坪群中的蛇绿岩为铝黏土矿形成提供了成矿物质。本溪组底部铁质黏土与上部铝黏土矿稳定元素比率(例如Zr/TiO₂、Hf/TiO₂、Nb/TiO₂、Ta/TiO₂)存在明显差异,揭示二者为不同来源: 底部铁质黏土岩和铁矿层为底板碳酸盐岩原地风化的产物;而上部铝黏土矿是异地搬运物,北秦岭造山带在晚石炭世的整体抬升为华北铝黏土矿形成提供了重要的成矿物质。  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

Mineralogy,Fluid Inclusion,and Hydrogen and Oxygen Isotope Studies of the Intrusion‐Related Yangla Cu Deposit in the Sanjiang Region,SW China: Implications for Metallogenesis and Deposit Type     

Li‐Juan Du  Bo Li  Zhi‐Long Huang  Jun Chen  Jia‐Xi Zhou  Guo‐Fu Zou  Zai‐Fei Yan 《Resource Geology》2020,70(1):28-49

The Yangla deposit is an intrusion‐related Cu deposit in the Jinshajiang tectonic belt (eastern Sanjiang region, SW China). Despite extensive studies that have been conducted on this deposit, the relationship between the granitic magma and Cu mineralization is still unclear, and hence, the genesis is debated. To answer this question, we conducted an integrated study of mineralogy, fluid inclusions (FIs), and hydrogen and oxygen (H‐O) isotopes. Three mineralization stages were identified based on the ore textures, alteration zonation, and crosscutting relationships: (i) pre‐ore prograde skarn (stage I), with the garnet and pyroxene dominated by andradite and diopside, respectively; (ii) syn‐ore retrograde alteration (stage II), which is subdivided into the early syn‐ore stage (stage IIa) marked by retrograde hydrated mineral assemblages and significant Fe‐Cu‐Mo‐Pb‐Zn sulfide mineralization, and the late syn‐ore stage (stage IIb) featured by quartz‐calcite veins; and (iii) late supergene mineralization (stage III), which is characterized by secondary azurite and malachite. These results of mineralogy, FIs, and H‐O isotopes indicate that: (i) Cu mineralization has a close temporal, spatial, and genetic relationship with skarn alteration; (ii) the ore fluids were magmatic dominated with late‐stage meteoric water incursion; and (iii) Type‐S (halite‐bearing) and Type‐V (vapor‐rich) FIs coexisted in garnet and clinopyroxene of stage I, indicating that fluid boiling might have occurred during this stage. From stage I to stage IIa, the FI type transformed from Type‐S + Type‐V + Type‐L (liquid‐rich) to Type‐V + Type‐L with the conduct of mineralization and was accompanied by the disappearance of Type‐S, and homogenization temperature and salinity also tended to decrease dramatically, which may be caused by the deposition of skarn minerals. At stage IIa, boiling of the ore fluids still continued due to the change from lithostatic to hydrostatic pressure, which triggered the precipitation of abundant quartz‐Cu‐Mo‐Fe sulfides. Furthermore, fluid mixing between a high‐temperature magmatic fluid and a low‐temperature meteoric water might cause a considerable drop in temperature and the deposition of Cu‐bearing quartz/calcite veins during stage IIb. Hence, we consider the Yangla deposit to be of a skarn type, genetically related to the Mesozoic magmatism in the Sanjiang region.  相似文献   

渤海湾盆地歧口凹陷地层压力结构特征     

姜文亚  宋泽章  周立宏  蒲秀刚  王娜  代昆  万伟超  刘祥柏 《吉林大学学报(地球科学版)》2020,50(1):52-69

深化含油气沉积盆地的压力结构研究，厘清异常压力的空间展布，对划分含油气系统、评价有利输导体系与明确勘探甜点区带具有重要的理论和实践意义。为深化渤海湾盆地富油凹陷的油气二次勘探，本文以歧口凹陷为研究对象，对其压力结构进行重点刻画。在实测地层压力的校正下，综合单井、连井和二维地震地层压力结构分析，厘清了歧口凹陷的压力结构特征，识别出4类纵向压力结构：①单超压带结构；②双超压带结构；③多超压带结构；④静水压力结构。纵向上，歧口地区存在3类纵向压力系统样式——单超压系统、双超压系统、静水常压系统。双超压系统是歧口凹陷的主要压力系统样式，广泛发育于主凹和各大次凹；从凹陷中心向盆地边缘，双超压系统逐渐向单超压系统、静水常压系统过渡。单超压系统主要分布于盆地边缘的斜坡和潜山区，如歧北高斜坡、羊三木-扣村潜山等。静水常压系统则主要分布在离深凹区更远的沈青庄潜山和埕北斜坡区域。上部超压系统和下部超压系统的顶板分别位于东营组和沙三段内部，侧向上受盆地边缘和深大断裂控制。上部超压系统的形成主要受欠压实作用控制，以歧口主凹为中心呈环带分布；而下部超压系统的形成主要受生烃作用控制，以主凹和几大次凹为中心分布。未来，下部超压系统中保存的天然气将成为歧口地区超深层天然气勘探的重点对象。  相似文献   

西昌市泸山地区典型火后泥石流特征与成因机制研究——以响水沟左岸3^#支沟为例     

铁永波  徐如阁  刘洪  王家柱  巴仁基  向安平  杨剑  欧阳渊  张玙  王宏 《中国地质调查》2020,7(3):82-88

2020年3月30日,四川省凉山州西昌市经久乡发生森林大火,山火燃烧后形成的山火灰和烧焦土体在强降雨作用下极易启动形成泥石流,给西昌市泸山、琼海景区生态环境及当地百姓生命财产安全带来潜在地质灾害风险。以西昌市安哈镇响水沟左岸3^#支沟为例,采用野外调查、无人机航拍、地球物理探测、现场及室内实验等手段,对2020年5月1日该沟发生的火后泥石流流体特征、动力学参数及成因机制等开展研究,系统分析了山火及降雨过程对该次火后泥石流形成的影响机制。该成果可为系统认识西昌泸山“3·30”山火地区火后泥石流的运动特征、物源规模、激发雨量及其发展趋势研判提供科学参考。  相似文献